Proudly Serving Sunnyvale, San Jose & the South Bay, CA

(408) 394-5855

Financing Available

2026-11-04 • Beeline Services

EV Charger Installation at Home: What to Know Before You Buy

Buying an EV is the easy part. Getting a reliable way to charge it at home is where most people run into questions they didn't expect — and the answers depend more on your electrical panel than on the car itself.

Level 1 vs. Level 2: the real difference

Every EV ships with a Level 1 cord that plugs into a standard 120V outlet. It works, but it's slow — often 10+ hours for a meaningful charge. A Level 2 charger runs on a 240V circuit, the same voltage as an electric dryer, and can fully charge most EVs overnight in 4-8 hours. Almost everyone who charges at home ends up wanting Level 2.

Why the panel matters more than the charger

A Level 2 charger draws a meaningful, continuous load — often 30 to 50 amps. Whether your home can support that without issue depends on how much spare capacity your electrical panel has left after accounting for everything else already running: HVAC, water heater, kitchen appliances, and so on. This is why a proper installation starts with a load calculation, not just a quote for a charger and a cable run.

When a panel upgrade is actually needed

Newer homes with 200-amp panels often have enough headroom to add a charger circuit with no other changes. Older homes — especially ones still running the original 100-amp panel — may not. If you're also planning to electrify other parts of the home (heat pump HVAC, heat pump water heater, induction range), it's worth having the panel evaluated for the whole picture rather than piecemeal, one appliance at a time.

Permits and inspection

EV charger circuits in California typically require an electrical permit, and most jurisdictions inspect the installation before it's signed off. A licensed electrician handles the permit application and schedules the inspection as part of the job — this isn't something to skip even if a charger seems to work fine without it.

Where to mount it

Garage mounting near your parking spot is the most common setup, but the charger needs to be within cable reach of where you actually park, with the circuit run from the panel to that location. If your panel is on the opposite side of the house from the garage, that run adds to the job — worth knowing before you get a quote that assumes a short, simple run.

What to ask before you commit

Does the quote include a load calculation, or just the charger and cable run? Is a permit included, or an add-on? Is the panel capacity confirmed, or assumed? Getting clear answers up front avoids a surprise mid-project change order if the panel turns out to need an upgrade.

Need this handled by a professional?

Call Beeline Services at (408) 394-5855 or Learn more about EV charger installation.

FINANCING CALL NOW